The gynecological examination bed is used for sub-examination, treatment and flushing of obstetrics and gynecology patients. It adopts the combination of bed body and mattress, which is high-grade and luxurious, and is very convenient to use.

Installation and use of gynecological examination bed:
1. Installation: Install the bed frame and mattress correctly, tighten the screws, check whether the segmented adjustment range of the bed table meets the requirements, and adjust the leg support to the appropriate height to lock.
2. Adjustment of the back panel: Lift the back panel up and hear a click to fold up a gear, which can be adjusted to a suitable gear angle according to the inspection needs; when the back panel is to be flattened, turn the back panel upward. Push it all the way down and put it in place again. Then put the mattresses on separately, check whether the whole bed is stable, and the installation is complete.
3. Use of gynecological examination bed: The patient should go to bed from the side of the seat board, let the weight of the body rest on the seat board position, and then put the legs, backrest, etc. for examination and treatment.
4. The dirt left on the bed body and mattress during inspection and treatment should be cleaned in time, dried and disinfected, and placed in a cool and dry place.
The installation and use of gynecological examination bed is introduced here, I hope it can help you.