Shadowless Operation Lamp generally consists of single or multiple lamp caps, which are fixed on a cantilever and can move vertically or cyclically. The cantilever is usually connected to a fixed coupler and can rotate around it. The Shadowless Operation Lamp adopts a sterilizable handle or a sterile hoop (curved track) for flexible positioning, and has an automatic brake and stop function to control its positioning. It maintains a suitable space on and around the surgical site. The fixing device of the Shadowless Operation Lamp can be placed on a fixed point on the ceiling or wall, or on a track on the ceiling.

Daily maintenance:
1. Daily inspection
Lamp working status (PRX6000 and 8000). Method: Use a piece of white paper on the work area, if arc-shaped shadows appear, change the corresponding bulb. The disinfection handle is in place. Method: Two "clicks" during installation. Cleaning: Wash the exterior with a weak alkaline solvent (soapy water); avoid using chlorine-containing lotion (damages metal) and alcohol lotion (damages plastic and paint).
2. Monthly inspection
It is mainly to check whether the backup power system (battery) is normal. Method: cut off the 220V power supply and see if the standby power supply is activated.
3. Lamp life
The halogen lamp, that is, the overall reflection Shadowless Operation Lamp, has an average bulb life of 1,000 hours; when more LED Shadowless Operation Lamps are used, the bulb life is basically around 60,000 hours. For the lamp holder, it is basically replaced once a year.
4. Annual inspection
Maintenance four steps (performed by a certified engineer), tighten the power cord connector (input and output of the control box). The Shadowless Operation Lamp manufacturer tells you the screw brushes at each connection, adjust the rotation limit (for example, the 4000 lamp holder surrounds its lamp holder arm), the bulb working voltage (23V AC+DC), and each joint brake, check the verticality of the suspension pipe and the suspension system Balance, whether the fastening of the screws at the joints of each part is normal, whether the brakes are normal when the joints are acting, the rotation limit heat dissipation effect, the status of the lamp holder, the installation of the disinfection handle, and the diameter of the illuminance spot.