The electric operating table is controlled by a microcomputer and dual manipulators to complete multi-angle operation, and is equipped with a confirmation switch to prevent misoperation. The entire hydraulic control system uses imported hydraulic components, which has low noise and high safety. The electric operating table is specially designed for eye and brain surgery. Ultra-low position, the doctor can seat operation during the operation, and the entire worktable can be moved longitudinally back and forth to complete the entire C-arm camera or fluoroscopy.

The electric operating table manufacturer tells you to extend the width of the table to meet the clinical needs at the time. The tabletop is divided into 5 moving parts: head, shoulders, back plate, buttocks and leg plates. All line segments are made of X-ray fluoroscopy materials. There is a shaded guide rail under the board, and a black box can be photographed. The medical pendant and the medical suspension bridge are used in the hospital ICU ward, and they are the standard medical rescue auxiliary equipment of the modern intensive care unit.
The electric operating table is mainly composed of a bridge frame, a dry section and a wet section. Its characteristic lies in a reasonable dry and wet structure. The wet area is equipped with a lifting and flexible infusion stand. It must comply with the strict standards for the use of medical pendants. The gas terminal plug should be pulled out and put gently. The electric operating table manufacturer tells you that the power socket must be plugged into the low end when using medical equipment, and there should be no visible phenomenon to prevent the risk of leakage. When using it, remember not to swing back and forth with too much force, and must move slowly, because the method creates a risky situation.